Jewelers Bench Anvil, 18 lbs (not dressed)
This is an awesome
`unfinished anvil. The size and shape is perfect for the smaller projects that are too small for the traditional size anvil. Blacksmiths, jewelers, tinsmiths, armor makers, coppersmiths & find it useful for small delicate projects. The tinsmith and jewelers will be pleased to find this anvil polishes up nicely.
Face is 13" long from the end of the horn to the heel. of the anvil face.
The anvil face measures 2 3/4" wide and 7" long
The horn is 3" wide at the largest point and tapers down to a point. The anvil sets 6" off the bench.
The hardy hole is slightly over 5/8" and goes all the way through the anvil face.
Made of ductile iron
Polishing is achievable to a very fine finish.
This is a nice anvil for the blacksmith, home hobbyist or metal worker With some work it will look handsome on the bench.
Weighs 18.50 lbs.
Made in the USA.
Very limited quantity so you should get one now.
This is an awesome
`unfinished anvil. The size and shape is perfect for the smaller projects that are too small for the traditional size anvil. Blacksmiths, jewelers, tinsmiths, armor makers, coppersmiths & find it useful for small delicate projects. The tinsmith and jewelers will be pleased to find this anvil polishes up nicely.
Face is 13" long from the end of the horn to the heel. of the anvil face.
The anvil face measures 2 3/4" wide and 7" long
The horn is 3" wide at the largest point and tapers down to a point. The anvil sets 6" off the bench.
The hardy hole is slightly over 5/8" and goes all the way through the anvil face.
Made of ductile iron
Polishing is achievable to a very fine finish.
This is a nice anvil for the blacksmith, home hobbyist or metal worker With some work it will look handsome on the bench.
Weighs 18.50 lbs.
Made in the USA.
Very limited quantity so you should get one now.
This is an awesome
`unfinished anvil. The size and shape is perfect for the smaller projects that are too small for the traditional size anvil. Blacksmiths, jewelers, tinsmiths, armor makers, coppersmiths & find it useful for small delicate projects. The tinsmith and jewelers will be pleased to find this anvil polishes up nicely.
Face is 13" long from the end of the horn to the heel. of the anvil face.
The anvil face measures 2 3/4" wide and 7" long
The horn is 3" wide at the largest point and tapers down to a point. The anvil sets 6" off the bench.
The hardy hole is slightly over 5/8" and goes all the way through the anvil face.
Made of ductile iron
Polishing is achievable to a very fine finish.
This is a nice anvil for the blacksmith, home hobbyist or metal worker With some work it will look handsome on the bench.
Weighs 18.50 lbs.
Made in the USA.
Very limited quantity so you should get one now.
