Swage Block #5, 5 Different Sized Swage Radiuses
Making Tenons? This is Your Solution!
APPROX. 6 X 3 X 2”
Artist Blacksmiths sometimes require a tool that will allow metal to be formed in ways that an anvil or traditional industrial swage block will not allow. We have developed swage blocks that are individual and easy to handle that can be held in a vise. No more searching for the heavy expensive swage blocks, or having to manhandle one.
This swage block is 6" long and 2" wide and has 5 forming radius'. The width of each radius is as follows: 3/8", 1/2", 5/8", 3/4" and 7/8".
This is a very useful tool. The swage is made of tough 60/45/15 ductile iron. The tool has a 3/4'' bar on the underside to use on your post vise or modify to use on your anvil.
The swage is used by Blacksmiths and Tinsmiths to form round stock for tenons etc.
We have 3 other varieties of swage blocks used in the trade of blacksmithing so check them out too.
Casting weighs approx. 6 lbs.
Made in the USA!
Making Tenons? This is Your Solution!
APPROX. 6 X 3 X 2”
Artist Blacksmiths sometimes require a tool that will allow metal to be formed in ways that an anvil or traditional industrial swage block will not allow. We have developed swage blocks that are individual and easy to handle that can be held in a vise. No more searching for the heavy expensive swage blocks, or having to manhandle one.
This swage block is 6" long and 2" wide and has 5 forming radius'. The width of each radius is as follows: 3/8", 1/2", 5/8", 3/4" and 7/8".
This is a very useful tool. The swage is made of tough 60/45/15 ductile iron. The tool has a 3/4'' bar on the underside to use on your post vise or modify to use on your anvil.
The swage is used by Blacksmiths and Tinsmiths to form round stock for tenons etc.
We have 3 other varieties of swage blocks used in the trade of blacksmithing so check them out too.
Casting weighs approx. 6 lbs.
Made in the USA!
Making Tenons? This is Your Solution!
APPROX. 6 X 3 X 2”
Artist Blacksmiths sometimes require a tool that will allow metal to be formed in ways that an anvil or traditional industrial swage block will not allow. We have developed swage blocks that are individual and easy to handle that can be held in a vise. No more searching for the heavy expensive swage blocks, or having to manhandle one.
This swage block is 6" long and 2" wide and has 5 forming radius'. The width of each radius is as follows: 3/8", 1/2", 5/8", 3/4" and 7/8".
This is a very useful tool. The swage is made of tough 60/45/15 ductile iron. The tool has a 3/4'' bar on the underside to use on your post vise or modify to use on your anvil.
The swage is used by Blacksmiths and Tinsmiths to form round stock for tenons etc.
We have 3 other varieties of swage blocks used in the trade of blacksmithing so check them out too.
Casting weighs approx. 6 lbs.
Made in the USA!
